Asphalt Calculator
Enter the dimentions of the area to pave
You can calculate Asphalt / Hot Mix driveway cost and material estimate using our Hot Mix Asphalt Tonnage Calculator.
Check Results
Width (meters)
Length (meters)
Thickness (millimeters)
Cost of Hotmix per ton $
Check Results
Calculated Area
0.000 Square Meters
Calculated Volume
0.000 Cubic Meters
Estimated HotMix Required
0.000 Tons
Estimated Cost of Hotmix
0.000 + GST & Delivery Charge
Disclaimer
Actual densities may vary depending on the components of the mix and also vary somewhat between different mixes. But this value is for estimating standard. The tonnage calculation is specific to Asphalt only.
1. How to measure the pavement?
To determine the amount of asphalt you will need for a paving job you first need to know the area to be paved. This may be simple if the area to be paved is square, rectangular or constant width of road. However, this is seldom the case.. Please refer to Measuring Guidelines.
2. How much does a ton of asphalt / Hot Mix cover?
One ton of asphalt covers:
- ½” or 12.7 mm thick = 95 SqM
- 1” or 25.4 mm thick = 48 SqM
- 2” or 50.8 mm thick = 24 SqM
- 4” or 101.6 mm thick = 12 SqM
3. How much is a ton of asphalt / Hot Mix?
- Price:
Hotmix $175.00 ton + GST
Polymer + rubber hotmix $185.00 ton + GST ( add $10.00 extra per ton on the base price)
4. How much is asphalt / Hot Mix cost per square meter?
Based on the above price:
4” or 101.6 mm thick = 12 SqM = A$14.80 / SqM + GST
½” or 12.7 mm thick = 95 SqM = A$1.85 / SqM + GST
1” or 25.4 mm thick = 48 SqM = A$3.70 / SqM + GST
2” or 50.8 mm thick = 24 SqM = A$7.40 / SqM+ GST